Installation Instructions

Here are four simple steps to installing your Salik tag:

1. Get the position right

You need to position your tag approximately 1 cm below your rearview mirror.
(If you have a vehicle with a metallic windscreen, look at the middle of your windscreen that is covered with dots or is lighter in colour than the rest of the windscreen. The best position for your tag is within this dotted or lighter area).

2. Clean your windshield

Clean and dry the inside of your windshield where you’ll be sticking your Salik tag.

3. Peel your Salik tag

Hold your tag by the edges and peel the transparent liner off the sticky tag.

4. Stick your Salik tag

Press one edge of the tag to the windshield and slowly work your way to the opposite edge, rubbing the tag's surface to avoid trapping any air bubbles between the tag and your windshield.

You only need one tag per vehicle.

If you have any questions about installing a Salik tag in your vehicle, please contact us.