Installation Instructions

How to install your Salik Tag

Read all instructions before installing your tag.
Install your tag on a proper location, removing any aftermarket tint between the tag and the glass before installation.
Install only one Salik tag in your vehicle
Remove air that may become trapped under the tag

Clean & Position

Clean and dry the inside of your windshield where your tag will be mounted. The proper location for your tag is approximately 1 cm below the rear view mirror post.
In certain types of vehicle you may need to install the tag in a special location.

For more information about special installation, click here.

Download (.pdf format)

Peel

Hold your tag by the edges and peel the transparent liner from the tag.

Stick

Press one edge of the tag to the windshield, and slowly work your way to the opposite edge as shown, rubbing the tag's surface to avoid air bubbles between the tag and the windshield.

Download (.pdf format)

Top Back to Homepage